FRONT LENS COVER: The internal green laser module of your VIRIDIAN is equipped with an anti-reflective coated glass cover piece. If you notice any degradation in the quality of the green aiming point and/or beam, this front lens cover will need to be cleaned of any gun powder residue.

This glass lens cover resides just inside the small aperture at the front of your Viridian. To clean the glass lens cover, carefully insert and gently swirl or glide a Q-tip over this glass lens. The Q-tip should be dipped with clean water, alcohol, or general purpose window cleaner.

EXTERIOR OF UNIT: Clean your VIRIDIAN by wiping with a soft, damp cloth. Standard gun cleaning solvents may be used to clean stubborn areas.

ELECTRICAL CONTACTS: For cleaning of all electrical contacts, use a cotton swab dipped in alcohol. To remove heavy build-up on the contacts, carefully rub with a standard pencil eraser (be sure to thoroughly remove eraser residue).

WARNINGS
Always check to see that the chamber of the weapon is empty or "clear" before attempting to mount or dismount the VIRIDIAN. Follow the "clearing" procedures as set forth in the manual for your firearm.

Make sure the weapon is clear and on SAFE before proceeding.

Prior to cleaning, dismount the VIRIDIAN from your weapon and remove the batteries.

It is recommended that you clean your accessories periodically to ensure proper working condition.

WARNING
Do not use highly basic, acidic, or flammable cleaning compounds.
Do not use ultrasonic cleaning methods.